PART 3 HOW TO CEILING FAN WIND TURBINE


THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT WOULD COST TOO MUCH FOR REPAIRS AND NEW DEPOSITS AND OLD BILL TO RECONNECT, ESPECIALY WITH REPAIRS FOR A NEW SERVICE BOX AND UPDATING TO A BREAKER SYSTEM AND THE WIRES DESTROYED IN THE HOUSE. ALTHOUGH THIS UNIT WILL NOT NORMALLY SUPPLY A NORMAL HOUSE HOLD IT WILL ALLOW HIM TO HAVE LIGHTS , RADIO, TV , CELLPHONE CHARGING, AND A FEW MORE THINGS BUT NOT ALL AT ONCE OR CONSTANTLY. BUT 20 DOLLARS A DAY FOR GAS IN A GENERATOR IS NOT AN OPTION EITHER. A BAG OF ICE, AND A COOLER IS. WE ARE MAKING A SOLAR HOT WATER HEATER AS WELL. BY 1:00 PM HE WILL HAVE ENOUGH WATER TO DO DISHES AND GET A NICE HOT SHOWER. THEN RELAX BY THE TV OR RADIO FOR A FEW HOURS ON STORED ENERGY. THEN GO TO SLEEP WITH A SMILE. IF HE GETS UP IN THE NIGHT HE CAN JUST TURN ON THE LIGHT. AND ITS ALL FREE. I HAVE ONE CONFESSION TO MAKE ABOUT THE ONE IN THE FIRST VIDEO THAT EVERYONE HAS COMPLEMENTED ON FROM THE BEGINNING. THAT IS , THAT THE ONE THAT IS IN THE VIDEO IS THE 7th OR 8th ONE I DID. I DID IT FOR SOMEONE ELSE BUT I DESTROYED ONE OF THE COIL SETS IN IT BY PULLING ON THE WIRES TO HARD WHILE I WAS RETHREADING THE WIRES TO COME OUT THE OTHER SIDE. BUT THE 12 VOLT SYSTEM INSTEAD OF 24 VOLT SYSTEM WILL NOT SLOW THE BLADES DOWN WHEN ...

Be Sociable, Share!
You can leave a response, or trackback from your own site.

23 Responses to “PART 3 HOW TO CEILING FAN WIND TURBINE”

  1. recepturgut02 says:

    Hi. What if i put larger magnets? Would that mean more power? Thanks

  2. muddymuddymuddmann says:

    GREAT COMMENT HAWK, THANKS FOR THE INFO. I LOVE THIS COMMENT.
    MUDDy

  3. Hawk6DM says:

    Just one comment from an aircraft mechanic. You mentioned that you need strong bolts and then mentioned stainless steel. A good quality carbon steel bolt is much stronger than stainless. However stainless is non-magnetic, depending on the amount of chromium and nickel it has in it. We never use stainless in shear. And only occasionall use it in light tensile loads. Aircraft grade cadmium plated bolts are the best use for tensile or shear strength. You do need to specify what type of load.

  4. muddymuddymuddmann says:

    THICKER COIL WIRES WOULD GIVE YOU MORE AMPS AND LESS VOLTAGE. THUS THE PROP SIZE MIGHT HAVE TO BE RECALCULATED. YOU CAN GET UP TO 400 WATTS THAT WAY. PAKSCIENCECLUB DID THEIRS THAT WAY BUT SHOWED NO BENCH WORK. JUST THE TEST RUN. LEAVING THE ORIGINAL WIRE, AND JUST SPLITTING THE COILS AND CONNECTING IN SERIES CAN DO THE SAME. JUST TRICKY, BUT LESS WORK AND PATIENCE. I SPLIT THE COILS BY 2, AND GOT 250 WATTS ON THE HARBOR BREEZE MODEL.
    MUDDy

  5. 3gd16 says:

    What would happen if i were to remove the coils and add thicker coil wires?

  6. muddymuddymuddmann says:

    99% OF THEM DO COME APART THE SAME WAY. IN FACT AFTER 5 YEARS I HAVE ONLY FOUND 3 THAT WERE OLD ENOUGH FOR OIL BATH BEARINGS, AND A FEW FAN BELT ONES ALSO. THEY ARE PRETTY INTERESTING TO SAY THE LEAST. I HOPE YOU ENJOY THE SERIES. OH AND I ACTUALY FOUND ONE THAT HAS AN ARMATEUR INSIDE THE STATOR. PRETTY COOL MODEL.
    THANKS DUDE.
    MUDDy

  7. kevykev38 says:

    Not all ceiling fans come apart like that.

  8. muddymuddymuddmann says:

    THANKS FOR THE IDEA, I MIGHT JUST DO THAT. IT WOULD BE NICE TO HELP OUTSIDE MY BOUNDARIES.
    MUDDy

  9. muddymuddymuddmann says:

    @dave97202 I BELIEVE YOU ARE TALKING ABOUT THE STEEL BANDING. NO OVERLAP IS NEEDED, JUST KEEP THE ENDS CLOSE TO EACH OTHER FOR A BALLANCED ROTOR. NIT PICK AWAY…. I DO!
    WEEE!
    MUDDy

  10. muddymuddymuddmann says:

    ALLIED MAGNETS HAS A DECENT DEAL ON THE 1/2 INCH BY 1/8th INCH ROUND DISK MAGNETS.
    MUDDy

  11. reverendzombie72 says:

    What type of magnets do I need? Where can I get them?

  12. bnewton81 says:

    Give it some thought, but I bet that you could get a grant from the government to do just that. Even in these trying times. One man can change the world.

  13. muddymuddymuddmann says:

    4000 COMBINED VIEWS A DAY HELPS, BUT IT IS FAR FROM WHERE I WANT IT TO BE. THE ONES THAT NEED IT MOST DONT HAVE ACCESS TO THE WEB MUCH. I WOULD LOVE TO TRAVEL AROUND THE WORLD AND INSTALL FREE ENERGY TO 3RD WORLD COUNTRIES WITH LITTLE TO NO ELECTRICITY. JUST A DREAM MAYBE, BUT A GOOD ONE THAT I HOPE TO SEE COME BY.
    TNX.
    MUDDy

  14. bnewton81 says:

    you obviously know what you are talking about, but the problem as with any technical subject is getting that knowledge to the ppl that don’t know.

  15. muddymuddymuddmann says:

    THANKS FOR THE COMPLIMENT! NOT REALY IN THE MOVIE BUSINESS. BUT I WILL MAKE A DVD OF THE CEILING FAN WIND TURBINE CLASS VIDEOS AND SELL IT FOR CHEAP SO SOME ONE DOESNT NEED THE COMPUTER TO SHOW A FRIEND ACROSS TOWN. IF YOU ARE A SUBSCRIBER, I WILL SHOW A VIDEO ON THE DVD WHEN IT IS READY.
    MUDDy

  16. babblake1 says:

    Good production , you in the movie bus.? Iwould buy video of more of this work.

  17. muddymuddymuddmann says:

    THANKS, I HAVE A FEW MORE HOURS OFF WORK NOW THAT THE SEASON IS GETTING COLDER. THAT MEANS I’M FIXING TO START DOING THE REST OF THE VIDEOS AND A NEW DUAL MAGNET ROTOR AXIAL FLUX ALTERNATOR FOR A TEN FOOT PROP WIND TURBINE. WWWWEEEEE!
    MUDDy

  18. JimmyLindstr0m says:

    best effin video producer of all in YT!

  19. muddymuddymuddmann says:

    THANK YOU
    MUDDy

  20. alphafirstoneyou says:

    thanks muddy, you videos are good.

  21. muddymuddymuddmann says:

    Ha Ha! THANKS! THESE ARENY THAT OLD. BUT I DO THINK THE OLDER ONES PUT OUT MORE. THE CASES ARE THICKER AS WELL.
    THE WIRING SYSTEM IS STILL 2 PHASE POWER. THE CAPACITORS MAKE THE PHASE SHIFT OF 90 DEGREES FOR THE SECOND COIL SET. EITHER WAY. WE USE THEM FOR POWER GENERATION OR JUST A COOL WEEKEND PROJECT. HOPE YOU ENJOY.
    MUDDy

  22. alphafirstoneyou says:

    1940 cieling fan. how but a 2010 cieling fan

  23. muddymuddymuddmann says:

    IT SOUNDS LIKE AN AXIAL FLUX ALTERNATOR. CHECK OUT OTHERPOWER . COM (THE HOME BREW WIND TURBINE EVOLUTION). SCROLL DOWN THE LIST UNTILL YOU SEE THE ONE CLOSEST TO YOURS, AND CLICK THE here BUTTON FOR THAT ONE. AND INSIDE THAT PAGE YOU WILL FIND A WELTH OF INFO. THE SIZE OF THE COILS, HOW MANY WRAPS AND WHAT SIZE WIRE USED, PLUS THE OUTPUTS IN DIFFERENT WINDS. ENJOY.
    MUDDy

Leave a Reply

*

PART 3 HOW TO CEILING FAN WIND TURBINE


THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT WOULD COST TOO MUCH FOR REPAIRS AND NEW DEPOSITS AND OLD BILL TO RECONNECT, ESPECIALY WITH REPAIRS FOR A NEW SERVICE BOX AND UPDATING TO A BREAKER SYSTEM AND THE WIRES DESTROYED IN THE HOUSE. ALTHOUGH THIS UNIT WILL NOT NORMALLY SUPPLY A NORMAL HOUSE HOLD IT WILL ALLOW HIM TO HAVE LIGHTS , RADIO, TV , CELLPHONE CHARGING, AND A FEW MORE THINGS BUT NOT ALL AT ONCE OR CONSTANTLY. BUT 20 DOLLARS A DAY FOR GAS IN A GENERATOR IS NOT AN OPTION EITHER. A BAG OF ICE, AND A COOLER IS. WE ARE MAKING A SOLAR HOT WATER HEATER AS WELL. BY 1:00 PM HE WILL HAVE ENOUGH WATER TO DO DISHES AND GET A NICE HOT SHOWER. THEN RELAX BY THE TV OR RADIO FOR A FEW HOURS ON STORED ENERGY. THEN GO TO SLEEP WITH A SMILE. IF HE GETS UP IN THE NIGHT HE CAN JUST TURN ON THE LIGHT. AND ITS ALL FREE. I HAVE ONE CONFESSION TO MAKE ABOUT THE ONE IN THE FIRST VIDEO THAT EVERYONE HAS COMPLEMENTED ON FROM THE BEGINNING. THAT IS , THAT THE ONE THAT IS IN THE VIDEO IS THE 7th OR 8th ONE I DID. I DID IT FOR SOMEONE ELSE BUT I DESTROYED ONE OF THE COIL SETS IN IT BY PULLING ON THE WIRES TO HARD WHILE I WAS RETHREADING THE WIRES TO COME OUT THE OTHER SIDE. BUT THE 12 VOLT SYSTEM INSTEAD OF 24 VOLT SYSTEM WILL NOT SLOW THE BLADES DOWN WHEN ...

Be Sociable, Share!
You can leave a response, or trackback from your own site.

23 Responses to “PART 3 HOW TO CEILING FAN WIND TURBINE”

  1. recepturgut02 says:

    Hi. What if i put larger magnets? Would that mean more power? Thanks

  2. muddymuddymuddmann says:

    GREAT COMMENT HAWK, THANKS FOR THE INFO. I LOVE THIS COMMENT.
    MUDDy

  3. Hawk6DM says:

    Just one comment from an aircraft mechanic. You mentioned that you need strong bolts and then mentioned stainless steel. A good quality carbon steel bolt is much stronger than stainless. However stainless is non-magnetic, depending on the amount of chromium and nickel it has in it. We never use stainless in shear. And only occasionall use it in light tensile loads. Aircraft grade cadmium plated bolts are the best use for tensile or shear strength. You do need to specify what type of load.

  4. muddymuddymuddmann says:

    THICKER COIL WIRES WOULD GIVE YOU MORE AMPS AND LESS VOLTAGE. THUS THE PROP SIZE MIGHT HAVE TO BE RECALCULATED. YOU CAN GET UP TO 400 WATTS THAT WAY. PAKSCIENCECLUB DID THEIRS THAT WAY BUT SHOWED NO BENCH WORK. JUST THE TEST RUN. LEAVING THE ORIGINAL WIRE, AND JUST SPLITTING THE COILS AND CONNECTING IN SERIES CAN DO THE SAME. JUST TRICKY, BUT LESS WORK AND PATIENCE. I SPLIT THE COILS BY 2, AND GOT 250 WATTS ON THE HARBOR BREEZE MODEL.
    MUDDy

  5. 3gd16 says:

    What would happen if i were to remove the coils and add thicker coil wires?

  6. muddymuddymuddmann says:

    99% OF THEM DO COME APART THE SAME WAY. IN FACT AFTER 5 YEARS I HAVE ONLY FOUND 3 THAT WERE OLD ENOUGH FOR OIL BATH BEARINGS, AND A FEW FAN BELT ONES ALSO. THEY ARE PRETTY INTERESTING TO SAY THE LEAST. I HOPE YOU ENJOY THE SERIES. OH AND I ACTUALY FOUND ONE THAT HAS AN ARMATEUR INSIDE THE STATOR. PRETTY COOL MODEL.
    THANKS DUDE.
    MUDDy

  7. kevykev38 says:

    Not all ceiling fans come apart like that.

  8. muddymuddymuddmann says:

    THANKS FOR THE IDEA, I MIGHT JUST DO THAT. IT WOULD BE NICE TO HELP OUTSIDE MY BOUNDARIES.
    MUDDy

  9. muddymuddymuddmann says:

    @dave97202 I BELIEVE YOU ARE TALKING ABOUT THE STEEL BANDING. NO OVERLAP IS NEEDED, JUST KEEP THE ENDS CLOSE TO EACH OTHER FOR A BALLANCED ROTOR. NIT PICK AWAY…. I DO!
    WEEE!
    MUDDy

  10. muddymuddymuddmann says:

    ALLIED MAGNETS HAS A DECENT DEAL ON THE 1/2 INCH BY 1/8th INCH ROUND DISK MAGNETS.
    MUDDy

  11. reverendzombie72 says:

    What type of magnets do I need? Where can I get them?

  12. bnewton81 says:

    Give it some thought, but I bet that you could get a grant from the government to do just that. Even in these trying times. One man can change the world.

  13. muddymuddymuddmann says:

    4000 COMBINED VIEWS A DAY HELPS, BUT IT IS FAR FROM WHERE I WANT IT TO BE. THE ONES THAT NEED IT MOST DONT HAVE ACCESS TO THE WEB MUCH. I WOULD LOVE TO TRAVEL AROUND THE WORLD AND INSTALL FREE ENERGY TO 3RD WORLD COUNTRIES WITH LITTLE TO NO ELECTRICITY. JUST A DREAM MAYBE, BUT A GOOD ONE THAT I HOPE TO SEE COME BY.
    TNX.
    MUDDy

  14. bnewton81 says:

    you obviously know what you are talking about, but the problem as with any technical subject is getting that knowledge to the ppl that don’t know.

  15. muddymuddymuddmann says:

    THANKS FOR THE COMPLIMENT! NOT REALY IN THE MOVIE BUSINESS. BUT I WILL MAKE A DVD OF THE CEILING FAN WIND TURBINE CLASS VIDEOS AND SELL IT FOR CHEAP SO SOME ONE DOESNT NEED THE COMPUTER TO SHOW A FRIEND ACROSS TOWN. IF YOU ARE A SUBSCRIBER, I WILL SHOW A VIDEO ON THE DVD WHEN IT IS READY.
    MUDDy

  16. babblake1 says:

    Good production , you in the movie bus.? Iwould buy video of more of this work.

  17. muddymuddymuddmann says:

    THANKS, I HAVE A FEW MORE HOURS OFF WORK NOW THAT THE SEASON IS GETTING COLDER. THAT MEANS I’M FIXING TO START DOING THE REST OF THE VIDEOS AND A NEW DUAL MAGNET ROTOR AXIAL FLUX ALTERNATOR FOR A TEN FOOT PROP WIND TURBINE. WWWWEEEEE!
    MUDDy

  18. JimmyLindstr0m says:

    best effin video producer of all in YT!

  19. muddymuddymuddmann says:

    THANK YOU
    MUDDy

  20. alphafirstoneyou says:

    thanks muddy, you videos are good.

  21. muddymuddymuddmann says:

    Ha Ha! THANKS! THESE ARENY THAT OLD. BUT I DO THINK THE OLDER ONES PUT OUT MORE. THE CASES ARE THICKER AS WELL.
    THE WIRING SYSTEM IS STILL 2 PHASE POWER. THE CAPACITORS MAKE THE PHASE SHIFT OF 90 DEGREES FOR THE SECOND COIL SET. EITHER WAY. WE USE THEM FOR POWER GENERATION OR JUST A COOL WEEKEND PROJECT. HOPE YOU ENJOY.
    MUDDy

  22. alphafirstoneyou says:

    1940 cieling fan. how but a 2010 cieling fan

  23. muddymuddymuddmann says:

    IT SOUNDS LIKE AN AXIAL FLUX ALTERNATOR. CHECK OUT OTHERPOWER . COM (THE HOME BREW WIND TURBINE EVOLUTION). SCROLL DOWN THE LIST UNTILL YOU SEE THE ONE CLOSEST TO YOURS, AND CLICK THE here BUTTON FOR THAT ONE. AND INSIDE THAT PAGE YOU WILL FIND A WELTH OF INFO. THE SIZE OF THE COILS, HOW MANY WRAPS AND WHAT SIZE WIRE USED, PLUS THE OUTPUTS IN DIFFERENT WINDS. ENJOY.
    MUDDy

Leave a Reply

PART 3 HOW TO CEILING FAN WIND TURBINE


THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT WOULD COST TOO MUCH FOR REPAIRS AND NEW DEPOSITS AND OLD BILL TO RECONNECT, ESPECIALY WITH REPAIRS FOR A NEW SERVICE BOX AND UPDATING TO A BREAKER SYSTEM AND THE WIRES DESTROYED IN THE HOUSE. ALTHOUGH THIS UNIT WILL NOT NORMALLY SUPPLY A NORMAL HOUSE HOLD IT WILL ALLOW HIM TO HAVE LIGHTS , RADIO, TV , CELLPHONE CHARGING, AND A FEW MORE THINGS BUT NOT ALL AT ONCE OR CONSTANTLY. BUT 20 DOLLARS A DAY FOR GAS IN A GENERATOR IS NOT AN OPTION EITHER. A BAG OF ICE, AND A COOLER IS. WE ARE MAKING A SOLAR HOT WATER HEATER AS WELL. BY 1:00 PM HE WILL HAVE ENOUGH WATER TO DO DISHES AND GET A NICE HOT SHOWER. THEN RELAX BY THE TV OR RADIO FOR A FEW HOURS ON STORED ENERGY. THEN GO TO SLEEP WITH A SMILE. IF HE GETS UP IN THE NIGHT HE CAN JUST TURN ON THE LIGHT. AND ITS ALL FREE. I HAVE ONE CONFESSION TO MAKE ABOUT THE ONE IN THE FIRST VIDEO THAT EVERYONE HAS COMPLEMENTED ON FROM THE BEGINNING. THAT IS , THAT THE ONE THAT IS IN THE VIDEO IS THE 7th OR 8th ONE I DID. I DID IT FOR SOMEONE ELSE BUT I DESTROYED ONE OF THE COIL SETS IN IT BY PULLING ON THE WIRES TO HARD WHILE I WAS RETHREADING THE WIRES TO COME OUT THE OTHER SIDE. BUT THE 12 VOLT SYSTEM INSTEAD OF 24 VOLT SYSTEM WILL NOT SLOW THE BLADES DOWN WHEN ...

Be Sociable, Share!
You can leave a response, or trackback from your own site.

23 Responses to “PART 3 HOW TO CEILING FAN WIND TURBINE”

  1. recepturgut02 says:

    Hi. What if i put larger magnets? Would that mean more power? Thanks

  2. muddymuddymuddmann says:

    GREAT COMMENT HAWK, THANKS FOR THE INFO. I LOVE THIS COMMENT.
    MUDDy

  3. Hawk6DM says:

    Just one comment from an aircraft mechanic. You mentioned that you need strong bolts and then mentioned stainless steel. A good quality carbon steel bolt is much stronger than stainless. However stainless is non-magnetic, depending on the amount of chromium and nickel it has in it. We never use stainless in shear. And only occasionall use it in light tensile loads. Aircraft grade cadmium plated bolts are the best use for tensile or shear strength. You do need to specify what type of load.

  4. muddymuddymuddmann says:

    THICKER COIL WIRES WOULD GIVE YOU MORE AMPS AND LESS VOLTAGE. THUS THE PROP SIZE MIGHT HAVE TO BE RECALCULATED. YOU CAN GET UP TO 400 WATTS THAT WAY. PAKSCIENCECLUB DID THEIRS THAT WAY BUT SHOWED NO BENCH WORK. JUST THE TEST RUN. LEAVING THE ORIGINAL WIRE, AND JUST SPLITTING THE COILS AND CONNECTING IN SERIES CAN DO THE SAME. JUST TRICKY, BUT LESS WORK AND PATIENCE. I SPLIT THE COILS BY 2, AND GOT 250 WATTS ON THE HARBOR BREEZE MODEL.
    MUDDy

  5. 3gd16 says:

    What would happen if i were to remove the coils and add thicker coil wires?

  6. muddymuddymuddmann says:

    99% OF THEM DO COME APART THE SAME WAY. IN FACT AFTER 5 YEARS I HAVE ONLY FOUND 3 THAT WERE OLD ENOUGH FOR OIL BATH BEARINGS, AND A FEW FAN BELT ONES ALSO. THEY ARE PRETTY INTERESTING TO SAY THE LEAST. I HOPE YOU ENJOY THE SERIES. OH AND I ACTUALY FOUND ONE THAT HAS AN ARMATEUR INSIDE THE STATOR. PRETTY COOL MODEL.
    THANKS DUDE.
    MUDDy

  7. kevykev38 says:

    Not all ceiling fans come apart like that.

  8. muddymuddymuddmann says:

    THANKS FOR THE IDEA, I MIGHT JUST DO THAT. IT WOULD BE NICE TO HELP OUTSIDE MY BOUNDARIES.
    MUDDy

  9. muddymuddymuddmann says:

    @dave97202 I BELIEVE YOU ARE TALKING ABOUT THE STEEL BANDING. NO OVERLAP IS NEEDED, JUST KEEP THE ENDS CLOSE TO EACH OTHER FOR A BALLANCED ROTOR. NIT PICK AWAY…. I DO!
    WEEE!
    MUDDy

  10. muddymuddymuddmann says:

    ALLIED MAGNETS HAS A DECENT DEAL ON THE 1/2 INCH BY 1/8th INCH ROUND DISK MAGNETS.
    MUDDy

  11. reverendzombie72 says:

    What type of magnets do I need? Where can I get them?

  12. bnewton81 says:

    Give it some thought, but I bet that you could get a grant from the government to do just that. Even in these trying times. One man can change the world.

  13. muddymuddymuddmann says:

    4000 COMBINED VIEWS A DAY HELPS, BUT IT IS FAR FROM WHERE I WANT IT TO BE. THE ONES THAT NEED IT MOST DONT HAVE ACCESS TO THE WEB MUCH. I WOULD LOVE TO TRAVEL AROUND THE WORLD AND INSTALL FREE ENERGY TO 3RD WORLD COUNTRIES WITH LITTLE TO NO ELECTRICITY. JUST A DREAM MAYBE, BUT A GOOD ONE THAT I HOPE TO SEE COME BY.
    TNX.
    MUDDy

  14. bnewton81 says:

    you obviously know what you are talking about, but the problem as with any technical subject is getting that knowledge to the ppl that don’t know.

  15. muddymuddymuddmann says:

    THANKS FOR THE COMPLIMENT! NOT REALY IN THE MOVIE BUSINESS. BUT I WILL MAKE A DVD OF THE CEILING FAN WIND TURBINE CLASS VIDEOS AND SELL IT FOR CHEAP SO SOME ONE DOESNT NEED THE COMPUTER TO SHOW A FRIEND ACROSS TOWN. IF YOU ARE A SUBSCRIBER, I WILL SHOW A VIDEO ON THE DVD WHEN IT IS READY.
    MUDDy

  16. babblake1 says:

    Good production , you in the movie bus.? Iwould buy video of more of this work.

  17. muddymuddymuddmann says:

    THANKS, I HAVE A FEW MORE HOURS OFF WORK NOW THAT THE SEASON IS GETTING COLDER. THAT MEANS I’M FIXING TO START DOING THE REST OF THE VIDEOS AND A NEW DUAL MAGNET ROTOR AXIAL FLUX ALTERNATOR FOR A TEN FOOT PROP WIND TURBINE. WWWWEEEEE!
    MUDDy

  18. JimmyLindstr0m says:

    best effin video producer of all in YT!

  19. muddymuddymuddmann says:

    THANK YOU
    MUDDy

  20. alphafirstoneyou says:

    thanks muddy, you videos are good.

  21. muddymuddymuddmann says:

    Ha Ha! THANKS! THESE ARENY THAT OLD. BUT I DO THINK THE OLDER ONES PUT OUT MORE. THE CASES ARE THICKER AS WELL.
    THE WIRING SYSTEM IS STILL 2 PHASE POWER. THE CAPACITORS MAKE THE PHASE SHIFT OF 90 DEGREES FOR THE SECOND COIL SET. EITHER WAY. WE USE THEM FOR POWER GENERATION OR JUST A COOL WEEKEND PROJECT. HOPE YOU ENJOY.
    MUDDy

  22. alphafirstoneyou says:

    1940 cieling fan. how but a 2010 cieling fan

  23. muddymuddymuddmann says:

    IT SOUNDS LIKE AN AXIAL FLUX ALTERNATOR. CHECK OUT OTHERPOWER . COM (THE HOME BREW WIND TURBINE EVOLUTION). SCROLL DOWN THE LIST UNTILL YOU SEE THE ONE CLOSEST TO YOURS, AND CLICK THE here BUTTON FOR THAT ONE. AND INSIDE THAT PAGE YOU WILL FIND A WELTH OF INFO. THE SIZE OF THE COILS, HOW MANY WRAPS AND WHAT SIZE WIRE USED, PLUS THE OUTPUTS IN DIFFERENT WINDS. ENJOY.
    MUDDy

Leave a Reply